| Type | Ceramic Basin |
| Warranty: | 5 years |
| Temperature: | >=1200℃ |
| Application: | Bathroom |
| Project Solution Capability: | total solution for projects |
| Feature: | Easy Clean |
| Surface: | Ceramic Glazed |
| Stone Type: | Ceramic |
| Port | Shenzhen/Shantou |
| Service | ODM+OEM |
The thickness of its cross section is 1.5 cm. The number of consumers in this category is relatively unknown. As this is a semi-finished product, its appearance must be matched with the bathroom cabinet to form a complete set of products for sale. Therefore, if you are a bathroom cabinet manufacturer that needs such products, please pay attention to our factory.
At present, the number of manufacturers of this ultra-thin ceramic washbasin is not very large. Due to the high technical requirements of this ceramic basin, the equipment that can produce this ultra-thin product is also expensive. In addition, the cooperation of very professional technical and engineering personnel is required to greatly improve the rigidity, levelness and product rate of the product. Usually, the ultra-thin cabinets and basins produced are mainly white, but our factory has another color to choose from, that is, black, and matt black. The size of this cabinet basin is very large. Our factory has an ultra-thin cabinet basin with a length of 60-120cm. So many sizes can meet the needs of consumers. The basin size of the wash basin is 26 * 50cm. The front of the basin is 8cm from the basin edge and 12cm from the back edge. This design not only ensures that the tap will not be splashed by water during daily use, but also ensures the installation and use of the tap. The shape of the basin is uniformly made into a semicircle, and the depth of the basin is 16cm, which can achieve great water storage and ensure the daily water demand. The overflow hole is also customized on the basin to quickly dredge and prevent overflow. On the side close to the faucet, a variety of shapes of anti overflow rings and several colors can be selected. The diameter design of the downhole also conforms to the international general standard. The tap hole can also be directly adjusted according to the customer's requirements. We accept various OEM and ODM products, please inquire.
